Application Scope
Fine bubble aerator system is designed exclusively for oxygen supply in sewage bio-treatment process. As its aerator membrane adopts EPDM rubber, which has corrosion resistance, aging resistance and service life unparallel by other engineering composite rubbers, thus it is widely applied in urban domestic sewage treatment system and industrial sewage treatment plants. This system can be used both for continuous running system and for batch running system.
Material of membrane: we have EPDM and Silicone rubber for your choice.
Color of the frame and base board: white and gray for your choice.
If used in special waste water, please provide detailed water composition specification for our technical staff to analyze and confirmation prior to use.
Product Show
Material Property
EPDM rubber does not contain plasticizer, can eternally keep elasticity, not easily cakes and ages, does not get brittle, with robust resistance to high temperature, low temperature, oils and corrosion; its service life is much longer than any other composite rubbers.
EPDM rubber membrane performance parameters are tabulated below:
| Item |
Unit |
Value |
| Hardness (Shore A) |
|
55-60/85-87 |
| Tensile strength |
Mpa |
17 |
| Tear breakage elongation, min. |
% |
>650 |
| Tear strength |
N/m |
>1.7*104 |
| Resilience |
% |
>45 |
Application Show
Parameters
| Mode |
PR-D330(12") |
| Material of Membrane |
EPDM |
Silicone rubber |
| Thickness of membrane |
2.0mm±0.1mm |
2.0mm±0.1mm |
| Effective diffusion area |
0.070m2 |
0.070m2 |
| Openings/pc |
about 10000 openings |
about 10000 openings |
| Diameter of bubble |
0.8mm-1.5mm |
1.0mm-1.8mm |
| Lifetime of membrane |
>6yrs |
>6yrs |
| Standard volume of aeration |
4.0m³/h-6.0m³/h |
4.0m³/h-6.0m³/h |
| Aeration range |
2.5m³/h-10m³/h |
2.5m³/h-10m³/h |
| Resistance loss |
2.0kPa-4.2kPa |
2.0kPa-4.0kPa |
Standard oxygen transfer rate
(depth of water:6m) |
≥38% |
≥37% |
| Standard oxygenation capacity |
≥0.55kgO2/h |
≥0.52kgO2/h |
| Theoretical power efficiency |
≥8.9kgO2/kw.h |
≥8.8kgO2/kw.h |
| Service aera |
0.4m2/pc-1.5m2/pc |
0.4m2/pc-1.5m2/pc |
Test was made under standard condition, i.e., clean, oxygen-free water (20ºC), air pressure is 1.013*105
Packing/Component Info
| Model |
PR-D215 |
PR-D270 |
PR-330 |
| Weight/Set |
0.49kg |
0.68kg |
0.96kg |
| Weight/Carton |
17.5kg |
18.5kg |
24kg |
| Pcs/Carton |
34 |
26 |
24 |
| Ball Check Valve |
Non |
Non |
For DN80 Pipe |
| Material of Support Base |
Reinforced PP |
Reinforced PP |
ABS |
| Outer Diameter of The Support Base |
225 |
270 |
330 |
| Specification of Connection Part |
DN20 Screw Connector |
| Pipes Applied To |
DN50~DN100 |
| Holder |
Wedged Holder |
| Material of Holder |
ABS |
Other Products
Company Show
Certificates
Exhibitions
WKAER is a trade mark we registered in China mainland. This trade mark has been using widely in our domestic business.
Q&A
Q1: Are you a trader or a factory?
A1: We are trader and we have our own factory.
Q2: Do you provide technical consultation?
A2: Yes, we do. We have technicians and engineers to help you with design and provide professional consultation as per your demand.
Q3: Can I visit your factory?
A3: Yes, you are welcome. Please contact our sales to arrange the reception.
Q4: Is your membrane made in China or somewhere else?
A4: We have membrane made in China and made in Germany. We provide two choices for you. Each has it is own advantages.
Notification:
Pinboard clamp is a component. It's independent from the aerator/diffuser. For more details, pls contact us.
Audited Supplier 
){kind=link}
){kind=link}